RIGGING HARDWARE
CARRYING THE LOAD
Seldén’s range of rigging hardware is a heritage from the legendary Swedish hardware producer Hasselfors which was acquired by Seldén 1989 and renamed Seldén Rigging AB. This production facility in Sweden has become the mechanical work shop for the Seldén Group and its product range has grown tremendously.
This is the home of our swage terminals, rigging screws, toggles and clevis pins – all machined from saltwater resistand stainless steel, AISI316.
BRONZE RIGGING SCREWS
Bronze, like stainless steel, is very strong and highly resistant to corrosion. By making the body of the rigging screw in chrome plated aluminium bronze and the terminals in high grade marine stainless steel, we have reduced the risk of the thread seizing up under heavy loads. A design feature which gives you a product that performs better and lasts even longer.
WIRE TERMINALS
Full range of multipurpose terminals for wire sizes 3 – 19 mm.
CLEVIS PINS, SPLIT PINS AND LOCKING RINGS
Find your spare clevis pin here. Imperial pins for rigging screws and metric for other parts of your rig. Match with the correct split pin or locking ring.
TOGGLES
To let the rig move freely is vital for the safety on board and the main purpose of a toggle is to achieve correct articulation in the connection between the rigging and the mast or chainplate. Toggles are also used to lengthen a stay, to raise a furling drum up over a bow anchor or to attach the wire to the mast.
TENSIONERS FOR BACKSTAYS AND HALYARDS
Mechanical or hydraulic tensioners are used for rig trim and make for a clean set up that is really easy to use. Tackles and cascade systems become obsolete so you will have less line to handle.
